No products in the cart.
192316-2L BMW E31,E36 Front Camber & Caster Strut Mount Kit (Stage 2-Street/Race)
192316-2L BMW E31,E36 Front Camber & Caster Strut Mount Kit (Stage 2-Street/Race)
$380.00
Brand: K-Mac
Make : BMW
Model: ‘3’ Series E36 320/325 (’91-Jun’92), ‘8’ Series E31 840/850 (’90-’00)
Year : 1991 – Jun 1992, 1990 – 2000
- Description
Product Description
BMW E31,E36 Front Camber & Caster Strut Top Mount Kit ‘3’&’8′ Series (Stage 2 – Street/Race)
ALL THE LATEST DESIGN BREAKTHROUGHS NOT FOUND IN OTHER BRANDS ….( Proudly “In-House” manufacture – not sourcing imports, allowing both total control over quality,
rapid constant improvements and do appreciate any construction ideal you can suggest how
we can further increase out market leadership )Genuine K-MAC NOT MANUFACTURED FROM STEEL OR SOFT BILLET ALLOY: But the very highest 7075 aircraft grade aluminum with “Extra H/Duty” self align spherical bearings (self lubed – PTFE lined) then encased in elastomer to extend life / day to day commuting (centers are also “replaceable” for virtual lifetime usage) and designed for minimum stack height.
ANOTHER K-MAC UPDATE INCORPORATED INTO THE DESIGN: Separate radial thrust bearings to take the “Steering Loads” (which also resolves annoying spring drag/ noise/ binding). Massive 85mm (3 3/8″) diameter fully sealed bearings and also included are OEM diameter alloy top spring seats along with separate seats to suit all brands of coil overs 60-70mm I.D.
FEATURES / ADJUSTMENT RANGE: Replaces the existing Strut Top Mounts (no modifications). Reinforcing the strut towers and with the unique K-MAC patented design providing the biggest (and quickest) adjustment range of both Camber and Caster. Street/Race settings can be recorded and changed in 30 seconds – just the time taken to loosen the 3 top mount nuts. Another K-MAC Patented design feature allows this fast adjustment to be made accurately under load.
ON TRACK DAYS: Ability to hit those corner apexes every time by being able to dial in extra negative Camber to reduce understeer/increase traction and allowing to go deeper into the corners with again increased traction and also braking response. In the pursuit of further lowering lap times and “Front row of the grid” on race days! Also see below re “K-MAC Adjustable Camber & Caster Bushings incl. Mono ball 2 axis design”.
RESULT: Finally – The adjustment capability to change tire “contact angles” to correctly resolve costly premature edge tire wear and steering pull. The result of other than showroom height conditions – day to day commuting, encountering high cambered roads, altered height through load carrying or lowering, fitting wide profile tires/wheels and curb knock damage. Along with the ability to improve traction understeer/oversteer.
>>>>> Front Camber & Caster Strut Mount (Stage 1 – Street) <<<<<
>>>>> Front Camber & Caster Strut Mount (Stage 3 – Full Race) <<<<<
*ALSO SEE COMPLETE RANGE OF “FRONT AND REAR BUSHINGS ” 1st. ITEM TO FAIL. ALL THE VERY LATEST DESIGN BREAKTHROUGHS (Experience of manufacturing performance bushings longer than anyone else – 1964). Resolving costly, premature bush wear with resultant wheel tramp, vibration, loss of traction under brake and acceleration.
CHECK LIST/EXTRA FEATURES K-MAC BUSHES VERSES OTHER BRANDS: Where other brands merely replace “OEM rubber bushes with urethane “ to eliminate the OEM oil and air voids in the endeavour to improve brake and steering response. The problem here is that with today’s autos multi link arms / angles, this inhibits the suspension arms traveling through their required arcs which can cause even more wheel tramp / loss of traction with arms binding, locking up and lead to breakage!
K-MAC bushings therefore where required are “Mono ball / 2 axis / self aligning ” and the unique K-MAC design providing more than 3 to 4 times the load bearing area.
Also because of ever increasing speed of assembly lines virtually all today’s Autos now only have Front and Rear Toe “directional adjustment”. Most K-MAC bushings therefore are adjustable for Camber and Caster allowing to change tire “contact angles”, to resolve costly premature edge tire wear and correctly fix steering pull.
WITH THE UNIQUE K-MAC “PATENTED DESIGN ADJUSTMENT SYSTEM” REVOLUTIONIZING THE INDUSTRY – PRIOR TO THIS THE LAST 40 YEARS HAS REQUIRED THE NEED FOR LABOUR INTENSIVE DISASSEMBLY AND BUSH REMOVAL. THEN THE INACCURATE TRIAL AND ERROR BUSH REPOSITIONING EACH TIME TO CHANGE ALIGNMENT SETTINGS. INSTEAD NOW WITH K-MAC WE HAVE CHANGED ALL THAT – IT IS PRECISE SINGLE WRENCH ADJUSTMENT ACCURATELY (ON CAR UNDER LOAD) DIRECT ON ALIGNMENT RACK THEN SECURED BY THE K-MAC UNIQUE “POSITIVE LOCK” SYSTEM.
